1. Configuring Your Hardware

1. Configuring Your Hardware
Prev	Chapter 8. Hardware Setup	Next

1.1. Hardware Detection and Configuration

Abstract

The HardDrake project has been developed to simplify hardware detection and configuration under GNU/Linux by providing a user-friendly interface.

1.1.1. Introducing HardDrake

HardDrake is a service for hardware detection, run at system boot time, and also a full GUI-based tool which ties together many of the tools already included in a GNU/Linux distribution. It automates and simplifies the process of installing new hardware. For the most part, HardDrake is able to detect most devices.

On one hand, HardDrake is used to display information, and on the other, it can launch configuration tools. With its easy-to-use interface, you can browse all the hardware your system contains.

1.1.2. Using HardDrake

To launch HardDrake, you can start it through:

the Mandriva Linux Control Center: click on the Hardware category, and then on the Hardware icon.
a terminal: type harddrake2 as root. You can also pass parameters to HardDrake through the command line (type harddrake2 -h to get a list of possible parameters).
the desktop: go to the main menu. The HardDrake entry is an item in the System+Configuration → Hardware sub-menu.

After all devices have been detected, the main HardDrake window appears (see Figure 8.1, “Selected Device”).

On the left is the device tree that shows all the hardware categories.

Figure 8.1. Selected Device

By selecting a device, you see additional information about it in the right frame. To better understand the meaning of the information presented, you can consult the help page accessible by choosing Help → Fields description from the menu.

Depending on the device selected, other buttons may appear:

Set current driver options. This pops up a window with all the module device parameters listed. For experts only!
Run config tool. Launches the Mandriva Linux configuration tool (available through Mandriva Linux Control Center) associated with that device.

Unknown hardware. A special category called Unknown/Others might also show up, containing all the unknown hardware in your system, as well as known hardware which does not fit into any existing categories (such as thermal sensors, random number generators, etc.).

1.2. Problems and Troubleshooting

If you think you have found a bug related to HardDrake, report it using the Mandriva Linux bug reporting tool (see Section 2, “Raise an Issue”).

Sound Cards. HardDrake does not probe for ISA PnP devices. If you have an ISA PnP sound card, run sndconfig or alsaconf from the command line. You may need to install the sndconfig or alsa-utils package.